2-5/16 Tie Rack Peg

• Precision 3/16" Fit Custom-milled tenon designed exclusively for a snug, secure fit in pre-drilled 3/16-inch holes.
• Solid Birch Hardwood: Crafted from premium birch for exceptional durability, easily outperforming standard softwood or plastic alternatives.
• Ready to Finish: Arrives fully sanded with a smooth surface and rounded edges, perfectly prepped for paint, wood stain, or laser engraving.
• High Load Capacity: Engineered to support up to 7 lbs per peg when properly mounted, ideal for hanging ties, belts, jewelry, or lightweight tools.
• Tool-Free Assembly: Simple friction-fit installation requires only a soft mallet to tap the peg securely into your custom-drilled hole.
• Bulk Manufacturing Ready: Available in large volume quantities to support commercial craft kit assemblers, toy makers, and educators.

These 3/16-inch wooden pegs are the ultimate hardware choice for custom woodworking and DIY organization projects. They are highly recommended for building bespoke wall-mounted tie and belt racks, custom jewelry displays, and personalized tool-hanging stations where standard pegboards fall short. Additionally, their smooth, non-toxic hardwood finish makes them a top component choice for educators and makers creating Montessori learning materials, fine-motor STEM activity boards, wooden toys, and bulk DIY craft kits.

• Will these pegs fit in a standard 1/4" or 1/8" pegboard?
  No. These wooden pegs are specifically designed to fit custom-drilled 3/16-inch holes and will not fit standard 1/4-inch or 1/8-inch commercial pegboards.
• What size hole do I need to drill for these tie rack pegs?
  For a secure, friction-tight fit, you should use a 3/16-inch drill bit to create the mounting holes for these pegs in your backing board.
• How much weight can one 3/16" birch peg hold?
  When properly installed into a solid wood backing with a minimum hole depth of 3/8", a single birch peg can safely support between 5 to 7 pounds.
• Do I need to sand these wooden pegs before painting or staining?
  These pegs arrive pre-sanded with a smooth finish. While they are ready for immediate painting or staining, a very light scuff sand can help optimize finish adhesion depending on your specific wood finish.
• Are these wooden pegs safe to use for children's wooden toys?
  Yes. Crafted from natural, non-toxic birch hardwood with rounded edges and a splinter-free smooth finish, they are excellent, safe components for Montessori toys and classroom STEM kits.
• Do I need wood glue to install these tie rack pegs?
  While the 3/16" tenon provides a snug friction fit that often requires just a tap from a soft mallet, applying a small drop of wood glue into the hole will ensure a permanent, twist-free bond.
• What is the actual length of the peg that sticks out from the wood?
  The total length of the peg is 2-5/16 inches. However, assuming a typical 3/8-inch installation depth into your board, you will have approximately 1-15/16 inches of usable hanging space.
• Can these birch pegs be laser engraved for custom branding?
  Absolutely. The unfinished natural birch wood features a straight, uniform grain that responds beautifully to laser engraving, burning, and custom branding for kit manufacturers.
• Are these pegs made from hardwood or softwood?
  These pegs are manufactured from solid Birch, a premium hardwood known for its superior structural integrity, dent resistance, and clean grain profile compared to pine or other softwoods.
• Do you offer bulk purchasing options for craft kit manufacturers?
  Yes, we offer multiple pack sizes ranging from small 25-packs for weekend DIYers up to 5000-packs designed specifically for commercial kit assemblers and educational material producers.