1/4" x 1-1/2" Fluted Dowel Pin

• 1-1/2" (38.10 mm) length for extended joint engagement in deeper or thicker workpieces
• 1/4" (6.35 mm) true diameter flutes compress for easy fit and strong bond in matching holes
• Multi-flute design ensures even glue spread and pressure relief along the entire dowel surface
• Manufactured from natural hardwood—typically birch or beech—for shatter resistance and stability
• Dual chamfered ends for splinter-free insertion and smooth assembly
• Maintains tight tolerances for batch production, repeat repairs, or professional shop work
• Available bulk pack quantities (100, 1,000, 24,000) support everything from hobby builds to manufacturing lines

These 1/4" x 1-1/2" fluted dowel pins are an industry favorite for strengthening joints in chair rails, door frames, cabinetry, and bookshelves. The standard diameter suits most doweling jigs and jig guides, while the extended length offers increased pull-out resistance in thicker entryways, shelving units, and restoration projects. They're also valued in crafts and educational model kits for aligning layers or reinforcing panels. For a smart alternate use, install two pins in parallel as robust alignment guides for homemade drawer slides or creative pivot joints—reliably benefiting from their straightness and uniformity.

• Are these pins kiln-dried or pre-finished?
  They are supplied raw hardwood for best glue adhesion and dimensional control; store in a dry location.
• Do they work with PVA and aliphatic resin glues?
  Yes, standard woodworking glues and most water-based adhesives work perfectly with fluted dowels.
• Are both ends beveled for easy insertion?
  Yes, each end is chamfered to prevent splitting and ensure a clean start in drilled holes.
• How do I select the correct length dowel for my project?
  Match dowel length to the depth of your holes—1-1/2" is ideal for thicker or deeper joints requiring extra holding strength.
• Can I order sample or custom quantities?
  Yes, contact us for single packs, bulk, or custom counts to suit any project or production run.
• Will these dowels expand with water-based glue?
  The fluted design compresses slightly, while hardwood material resists excess swelling, ensuring a tight fit as glue sets.
• Are these pins suitable for MDF or composite board joinery?
  Absolutely—just use the correct hole size and avoid over-gluing to minimize material swelling.
• What's the ideal storage for unused pins?
  A dry, sealed container is recommended to maintain optimal diameter and fit for future use.

Choose these 1/4" x 1-1/2" fluted dowel pins for every wood joinery need where strength, repeatability, and reliable alignment are essential in your build.